Tech Tips
Commonly Asked Questions
-
Why does my system LED flash when I turn my Ignition off?
If the system LED flashes after turning Ignition off the “Auto Starter Kill” feature is most likely on. Please refer to an install manual or contact the dealer who performed the installation to turn off the feature. Auto Starter Kill: Systems with “Auto Starter Kill” feature turned on will allow the system to passively activate the starter kill after an Ignition off state. The LED indicator for the system will also consistently flash when in the active mode. To allow vehicle to start you will need to send an “unlock” command even if vehicle is already unlocked. *This feature can be turned off/on in settings.
-
Why does my system LED flash when I disarm my alarm?
The system is more than likely sending a diagnostic code identifying an alarm trigger event and which zone was tampered. Once Ignition is turned on the diagnostic sequence will stop. Please refer to owner’s manual for tamper code diagnostics.