Support - Q & A
Commonly Asked Questions with Magnadyne Support Answers
Why does my system LED flash when I turn my Ignition off?
If the system LED flashes after turning Ignition off the “Auto Starter Kill” feature is most likely on. Please refer to an install manual or contact the dealer who performed the installation to turn off the feature. Auto Starter Kill: Systems with “Auto Starter Kill” feature turned on will allow the system to passively activate the starter kill after an Ignition off state. The LED indicator for the system will also consistently flash when in the active mode. To allow vehicle to start you will need to send an “unlock” command even if vehicle is already unlocked. *This feature can be turned off/on in settings.
Why does my system LED flash when I disarm my alarm?
The system is more than likely sending a diagnostic code identifying an alarm trigger event and which zone was tampered. Once Ignition is turned on the diagnostic sequence will stop. Please refer to owner’s manual for tamper code diagnostics.
How do I get my Wi-Fi in my RV-Link Pre-Wired RV?
If you have a prewired RV, we have 2 kits that are compatible with the prewiring. The "WF-Con" and the "WF-CON-LTE" are the 2 kits we offer. The difference between the 2 kits is the WF-CON does not have the ability to add a data plan and relies on a WIFI host to extend the signal which is more commonly used at the RV parks. The WF-CON-LTE kit has the same features as the WF-CON, but also has the option to add a data plan with ATT's 4G LTE network. Both Kits are available via our website. There is also a YouTube tutorial video: https://www.youtube.com/watch?v=V_t8ZOySKZA&t=3s